Sansevieria Silver Queen (Silver Queen Snake Plant)

Sansevieria silver queen

Sansevieria silver queen, also called the silver queen snake plant, is a succulent plant native to Africa, but popular as an indoor plant in many parts of the world. It gets its name from the silvery stripes that run along the length of its leaves and stems.

The silver queen snake plant isn’t your average houseplant. These gorgeous plants are famous for their durability and ease of care. If you’re ready to start taking better care of the houseplants in your life, then Sansevieria Silver Queen might be the plant to get you started!

Sansevieria silver queen is a popular variety of snake plant that grows well in low-light situations. This type of snake plant gets its name from the shiny, almost metallic sheen that coats the leaves and stems, especially when it’s exposed to more sun and water.

Origin and distribution

Sansevieria silver queen is a perennial flowering plant native to tropical and subtropical regions of Africa. It grows in sandy soil and water up to five feet deep. This plant has been cultivated in Florida for more than two centuries, but it was only introduced commercially in California in 1957.

The next year, Sansevieria trifasciata was exhibited at New York World’s Fair. Since then, Sansevieria silver queen has become one of the most popular houseplants. In fact, it is often referred to as mother-in-law’s tongue because of its long narrow leaves that resemble snake tongues.

Despite their common name, these plants are not related to true grasses; they are actually members of the lily family like all other plants in genus Sansevieria. They have fleshy roots and grow from rhizomes that form new offshoots when cut or broken apart.

Sansevieria silver queen propagation

Sansevieria silver queen

You can propagate sansevieria silver queen from stem cuttings. The plant has rhizomes that grow into new plants, so taking a cutting from one will not harm it and you can easily share it with friends. To take a cutting, use a sharp knife to cut off a piece of rhizome that is at least 1/2-inch long. Remove all leaves except for two or three along their length.

Pot it in moist soil and keep it near indirect light until you see roots forming. Once your snake plant starts growing again, transplant it into an 8-inch pot and place it outside where there is direct sunlight during the day. Sansevieria needs full sun to thrive.

YOU MAY ALSO LIKE:
Sansevieria Cylindrica Care (African Spear Plant)

If you live in a warm climate, such as Florida or Texas, put your snake plant outside during the summer months when temperatures are above 70 degrees Fahrenheit. When fall arrives, bring it inside and place it in a sunny window. Water only when the top inch of soil feels dry to touch.

In winter, water less frequently than you do during warmer months. It may die back completely if kept indoors during cold winter weather; if so, allow it to go dormant until spring returns before watering again.

Sansevieria silver queen care information

Sansevieria silver queen

Sansevieria silver queen can thrive with minimal care. Place it in a sunny spot but keep it out of direct sunlight. While it doesn’t need to be watered often, you should soak it thoroughly once a month or when its leaves begin to wilt. When you water your snake plant, don’t saturate its roots, just keep them moist so they don’t dry out and die.

Light requirement

Sansevieria grows under partial shade. Too much direct sunlight can burn its leaves, so it’s a good idea to put it near a window that receives light throughout most of the day. The moonlight snake plant is also susceptible to root rot if kept in standing water for too long. It should be watered only when its soil feels dry, usually once every week or two, and you should never let water stand in its pot for more than an hour or two at a time.

Soil/potting mix

Like any other plant, a snake plant prefers well-draining soil, so fill your pot with a mixture of at least 50 percent sand and 50 percent potting mix. The pot should have drainage holes to prevent overwatering. A one-gallon container is ideal for young plants. Also, make sure you place your Sansevieria Silver Queen in bright sunlight and away from heating vents or any drafty areas of your home that might dry out its leaves or cause them to fall off.

Watering

You’ll need to water your snake plant frequently. You should be watering it every week or so, and whenever you see that the soil is dry to about an inch in depth, regardless of whether you think it’s time for a fresh watering. The idea here is that frequent and consistent watering will keep your plant happy, healthy, and thriving.

Sansevierias don’t like to sit in wet soil, either; they prefer moist but not soggy conditions. If you find yourself needing to water more than once per week, consider moving your plant into a pot with slightly deeper roots or repotting it all together.

YOU MAY ALSO LIKE:
Sansevieria canaliculata - Rare Sansevieria Varieties

Fertilizer

Sansevieria is a very low-maintenance plant that only needs to be fertilized once every three or four months. If you are fertilizing your plant with chemical fertilizer, make sure to dilute it at half strength. So, if you were to use 1/4 cup of Miracle Grow in one gallon of water, you would use 1/2 cup of Miracle Grow in two gallons of water.

This will help cut down on any damage that can be caused by too much fertilizer. It’s also important to note that overfertilization could cause root burn and discoloration of leaves. If you notice these symptoms, discontinue using fertilizer until they go away and then start again slowly, using less each time.

Temperature

Sansevieria silver queen is known for its durability. However, it does like humidity and should be kept between 60 and 80 degrees Fahrenheit during daylight hours and 50 to 60 degrees at night. To keep your Sansevieria healthy, use a humidifier if necessary to increase humidity or move your plant near a water source or near a window where you know there will be water condensation in order to increase humidity around your plant.

Sansevieria prefers a little less light in its youth. In fact, if your home is very bright, you might want to give it more shade. And just as long as you keep it in optimal lighting conditions and make sure that its soil is moist, your plant will grow into a moonlight snake plant or silver queen snake plant that thrives on neglect. You’ll know when it needs water because of its dark green color and small leaves; they indicate water deprivation.

Humidity

Sansevieria is fairly easy to grow in most homes, as long as you keep them away from windows and provide high humidity. If you place your plant near a window, be sure to rotate it so that it never faces direct sunlight. Furthermore, Sansevieria is susceptible to fluoride toxicity; make sure that you don’t use a fluoridated water supply to water your snake plant.

The ideal humidity range is between 40 and 60 percent. They can survive in lower humidity levels, but you’ll need to mist your plant every day to keep it healthy. If you live in a dry climate, you might want to consider growing your snake plant indoors with a humidifier. You can also place your plant on a tray filled with pebbles and water; make sure that the water doesn’t touch your plant’s leaves, as it could cause root rot.

Pruning

Moonlight is a sturdy plant that requires very little in terms of pruning. Use clean, sharp pruning shears to cut leaves, and avoid trimming below where a leaf connects to its stem. It’s also a good idea to remove any yellowing leaves as they appear.

YOU MAY ALSO LIKE:
Sansevieria Bantel's Sensation (Bantel Snake Plant)

The more natural light you can give your Sansevieria Silver Queen, the better; direct sunlight is best, although even indirect sunlight will be sufficient if you can’t give it as much light. However, don’t put it in full shade, the lack of light will cause it to lose its vibrant color.

If your snake plant does get too big for its pot, don’t worry! Just repot it into a larger container with fresh soil. Don’t forget to water thoroughly after repotting.

When to repot

Sansevieria silver queen plants should be repotted once or twice a year. If you can tell that your snake plant is getting rootbound, it’s time to repot it. They like to have good drainage, so look for a potting mix that contains perlite and vermiculite. The rootball of your Sansevieria will expand rapidly after a repotting, so make sure you give it plenty of space in its new container.

Dormancy

The sansevieria silver queen snake plant doesn’t really have a dormancy period, but it does require conditions that mimic those found in its native tropical habitat. In temperate regions, such as many parts of North America, all plants experience a dormancy period where they slow their growth in response to shorter days and cooler temperatures.

If you live in an area with winter-like weather, you can help your Sansevieria Silver Queen snake plant by providing cool temperatures and less light during the winter months. If you don’t want to give up on your snake plant completely during these months, simply place it near a window facing south or west so that it receives indirect sunlight through most of the day.

It will still grow slowly during these months, but not as quickly as if left outside in direct sunlight for most of each day.

Sansevieria silver queen flower & fragrance

The flowers are an unusual purple-black color and they give off a delightful fragrance. The leaves do not look like snake skin, but instead, have a glossy shine to them. They grow to around 12 long and are in upright rosettes about 12 wide. They can be used as table centerpieces or floor plants.

Growth rate

The Sansevieria silver queen is also known as a snake plant and has an average growth rate of 3 inches per year. It typically takes 9 to 12 months for your Sansevieria Silver Queen to grow 1 foot tall and 5 feet wide. The longest recorded time it took a sansevieria plant to reach its full height was 18 months.

Toxicity

Sansevieria silver queen is toxic to cats, dogs and other pets if ingested. If you have small children, keep in mind that they may want to eat it because of its succulent appearance. Some people are sensitive to chemicals in Sansevieria and develop skin irritation or a rash after touching or handling it. Symptoms typically resolve once contact with Sansevieria has been discontinued.

YOU MAY ALSO LIKE:
Sansevieria Golden Hahnii: The Dwarf Snake Plant

USDA hardiness zones

Sansevieria silver queen thrives in USDA hardiness zones 10 and 11. If you live outside of these zones, you can still grow a sansevieria snake plant, but it will need more tender care. In fact, many people who live in colder climates have grown sansevieria plants indoors with great success. As long as you keep your snake plant warm and well-lit, it should be happy to grow indoors year-round.

Pests and diseases

Even snake plants are not immune to pests and diseases. They need proper sunlight and water to thrive. Sansevieria silver queen plant has been found susceptible to thrips, aphids, whitefly, mealybugs, mites, and root rot due to overwatering. Similarly, it can also get infected by spider mites, scale insects, or other fungal diseases such as Pythium spp., Rhizoctonia solani, and Fusarium oxysporum.

In order to prevent these problems make sure that you keep your sansevieria plant in a well-lit area where it receives at least 4 hours of direct sunlight each day. However, avoid placing your plant under direct sun for more than 6 hours per day because too much exposure to sun will cause brown spots on its leaves.

Furthermore, avoid placing your sansevieria near air conditioners and heating vents because extreme temperature fluctuations will stress out your plant making it vulnerable to various diseases.

Sansevieria silver queen vs moonshine

Sansevieria silver queen

Differentiating these plants is primarily determined by coloration, height, and leaf shape. There is a bluish/green coloration on the Sansevieria silver queen, and it has a tall, slender leaf shape. Unlike many snake plants, the Moonshine snake plant’s leaves are more rounded in the center, varying in hue from light to dark green.

When it comes to the shape of leaves, an experienced person may not be able to recognize the difference at first glance. There is a common misconception that Sansevieria silver queen leaves look like swords. The leaf has a width of 2 to 2-1/2 inches (7 centimeters) in the center.

Moonshine snake plant leaves have a width of between 3 and 5 inches (7.6 and 12.7 centimeters). There are a number of factors that will affect the width, such as sunlight, watering, humidity, nutrients, and temperature.

There is a bit of silver or gray on the leaves of the Sansevieria silver queen, whereas Moonshine plants are silvery green in color.